Logo PD Water Systems

Pearl - Shallow Well

JCC Shallow Well Water Pump - Water Pumps

JCC WATER PUMP FEATURES

An exclusive diffuser design with flow control device provides for compact construction, fast self-priming capability and low noise.
Reliable with new design features the JCC is more robust and forgiving when temporary abnormal operating conditions may exist.

The JCC is smaller than conventional pumps of a similar type, allowing for installation in restricted spaces and providing for easier retrofit applications.

Fast air evacuation reduces the risk of air-pockets developing at the mechanical seal preventing the danger of seal failure due to a lack of flushing and cooling.

The JCC are capable of lifting water from depths of 29 ft in less than 3 minutes, offers new possibilities on suction lift applications and provides better trouble free service on normal shallow-well suction lift duties, also with a long suction pipe above the water level.

The new diffuser and flow control device guide the fluid from the impeller into the central part of the pump casing, reducing turbulence and velocity, with effective use of the surrounding liquid in dampening the noise of flow.

JCC WATER PUMP APPLICATIONS

  • For drawing water out of a well.
  • For lifting water containing air or other gases.
  • For increasing water pressure from flooded suction applications.
  • As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).
  • For garden use.
  • For washing with a jet of water.
JCC WATER PUMP CONSTRUCTION

  • Close-coupled self-priming shallow-well jet pump with built-in ejector.
  • Connections: threaded ports NPT.
JCC WATER PUMP MOTOR

  • 2-pole induction motor, 60 Hz (n ˜ 3450 rpm).
  • Three-phase 230/460 V.
  • Single-phase 115/230 V, 115 V, 230 V.
  • Capacitor inside the terminal box.
  • Insulation class F.
  • Protection IP 44.
JCC WATER PUMP MATERIALS

  • Pump Casing: Cast iron GJL 200 EN 1561
  • Casing Cover: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
  • Impeller Brass: P-Cu Zn 40 Pb 2 UNI 5705
  • Wear Ring Impeller-Diffuser: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
  • Diffuser: PPO-GF20 (Noryl)
  • Ejector: PPO-GF20 (Noryl)
  • Shaft: Chrome Steel 1.4104 EN 10088 (AISI 304)
  • Mechanical Seal: Carbon - Ceramic - NBR

JCC WATER PUMP TECHNICAL DATA

MODEL

HP 

VOLT

PHASE

MAX. AMP

SUCT.

DISCH.

WT. LBS

JCC 05F16P

0.5

115/230

1

8.8/4.5

1"

1"

26

JCC 07F16P

0.75

115/230

1

10.5/5.4

1"

1"

32

JCC 10F16P

1

115/230

1

13.6/7

1"

1"

32


JCC Shallow Well Water Pump
Make click to enlarge the image or other views
zoom3 zoom4 zoom zoom2

JCC Shallow Well Water Pump

Click the menu to display technical information and do comparison

CHECK OUR COMPLETE LINE OF PRODUCTS